Find parts for your car
Models
- 45 (3) Apply 45 filter
- 75 (4) Apply 75 filter
- MG (7) Apply MG filter
- MG ZS (3) Apply MG ZS filter
- MG ZT (4) Apply MG ZT filter
- RANGE ROVER (10) Apply RANGE ROVER filter
- Range Rover (7) Apply Range Rover filter
- Range Rover Sport (4) Apply Range Rover Sport filter
- UNKNOWN (1) Apply UNKNOWN filter
- UNKNOWN (1) Apply UNKNOWN filter
- UNKNOWN (1) Apply UNKNOWN filter
- ZS (3) Apply ZS filter
- ZT (4) Apply ZT filter
Parts
- CV Gaiter Inner (17) Apply CV Gaiter Inner filter
- CV Gaiter Outer (17) Apply CV Gaiter Outer filter
- Doseur Valves (17) Apply Doseur Valves filter
- Link Arm (17) Apply Link Arm filter
- Rear Beam (17) Apply Rear Beam filter
- Rear Stabilizer Bar (17) Apply Rear Stabilizer Bar filter
- Rear Tie Bar (17) Apply Rear Tie Bar filter
- Replacement Wishbone Parts | Used, Second-Hand Wishbone (17) Apply Replacement Wishbone Parts | Used, Second-Hand Wishbone filter
- Steering Box (17) Apply Steering Box filter
- Steering Idler (17) Apply Steering Idler filter
- Steering Lock & Key (17) Apply Steering Lock & Key filter
- Steering Pulley (17) Apply Steering Pulley filter
- Suspension Leg Strut (17) Apply Suspension Leg Strut filter
- Suspension Spheres (17) Apply Suspension Spheres filter
- Suspension Strut (17) Apply Suspension Strut filter
- Torsion Bar (17) Apply Torsion Bar filter
- Track Rod End (17) Apply Track Rod End filter
- Wishbone - Upper Arm (17) Apply Wishbone - Upper Arm filter
Used Rover Link Arms
All used Rover Link Arms listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Rover from premium breaker yards from across the UK.
About Link Arms
A Rover link arm connects the suspension of the vehicle to its frame using bushings and is attached to the wheels through ball joints. There are typically two rear link arms on a vehicle, and a further two on the front of the vehicle.
The Rover link arm plays a key part in the vehicle’s suspension system as it is responsible for allowing tyres to move up and down freely and in line with the vehicle’s body. If a control arm needs replacing, the ride would be noticeably less smooth.
When a Rover link arm wears down and needs to be replaced you may notice that your tyres are not wearing evenly, or wear quickly. It is also possible that a Rover link arm may break if you drive over a large pothole or bump. In either of these events, the control arm should be replaced. It is also common for bushes and ball joints to be replaced at the same time if wear and tear is the cause.
After replacing a link arm, it is important that your wheels are also aligned to avoid uneven tyre wear.
Rover trivia
- The Rover name has had a turbulent history, but they achieved some amazing things. In March 1950, they unveiled the prototype of the Rover JET1. It was the first car to ever run off a gas turbine engine. It could reach a speed of 88mph! However, it did manage 150mph during speed tests. The JET1 is now on display at the London Science Museum.
- MG Motor, the current face of what used to be Rover, launched a supermini called the MG3 in 2013. The car catapulted the company back into the highlight as the brand became the UK's fastest-growing car manufacturer.
- John Kemp Starley, one of the two founders of Rover, made an electric-powered car in 1888!
- In 1952, noted car journalist, Bob Dearborn, famously wrote in his Road & Track review that, "… I honestly believe (barring the Rolls-Royce) that there is no finer car built in the world today."
- Although there were a few Rover-made cars released in the ‘80s, none of them had the word Rover on any of the badging. Instead, they were called Austins, but they did have a similar, Viking-inspired badge.