Used Land Rover Carb Mountingss

All used Land Rover Carb Mountingss listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Land Rover from premium breaker yards from across the UK.

About Carb Mountingss

The Carburettor is mounted on Land Rover carb mountings which are designed to act as a sealant, holding the carb firmly in position and perfectly aligned. The carb mountings are usually a flange/plate used with circular rubber seals to create a soft, secure fix between the carb and the mount.

The Land Rover carb mountings function to strengthen the holding of the carb to the intake manifold and to keep it in the right position, as well as absorbing vibrations and noise from the engine.

The carb has the important job of ensuring the right amount of air and fuel mix is provided to the cylinders in the engine in order for combustion to take place and for the engine to perform at its best. The Carburettor is essentially a pipe through which the air needed for combustion travels. The carb narrows in the middle which causes the pressure in the air, as it flows through the carb, to drop at this point, creating a vacuum which sucks the fuel in. It works by using valves, referred to as the choke and throttle, which take in the right amount of air and fuel which is mixed in the carb before it is sent to the engine.

Carb mountings will wear over time and can become brittle and cracked. Warped carb mountings can lead to a vacuum leak. Replacing this part when it has failed with Land Rover carb mountings will ensure perfect compatibility, specifically designed for the make and model of your vehicle.

Land Rover trivia

• The designer Charles S. King worked with Rolls Royce to design jet engines before going on to build the Range Rover. King would go onto building a car around those jet engines that then held the world land speed record, the first turbine-powered vehicle to do so.
• Although the first Land Rover was designed in 1947 (by Maurice Wilks), the company wasn't actually founded until 1978!
• The Range Rover designer hated what he had made. Charles Spencer "Spen" King CBE, was focused solely on designing a large V8 engine, and then just drew a box around it to show where the engine would sit. It annoyed him for the rest of his life, and he insisted that he'd only put 0.1% of development time on the car shape. He also hated that they would be used for anything other than farming, saying, "...to use them in the school run, or even in towns and cities at all, is completely stupid."
• According to the film, Judge Dredd (1995), Land Rover will be the last ever car manufacturer in the world. The car company had a heavy presence in the film, and you can still see some film versions of the car driving around the UK.
• Inspired by the Jeeps that had been used in WWII, the first Land Rover's steering wheel was in the middle of the dashboard. This was partly to counter the need to create left and right-hand drive models for different countries.