Find parts for your car
Models
- 159 (3) Apply 159 filter
- 206 (2) Apply 206 filter
- 3 Series (2) Apply 3 Series filter
- 307 (2) Apply 307 filter
- 406 (2) Apply 406 filter
- 407 (2) Apply 407 filter
- 607 (2) Apply 607 filter
- 807 (2) Apply 807 filter
- 9-5 (3) Apply 9-5 filter
- A3 (2) Apply A3 filter
- Almera (2) Apply Almera filter
- ASTRA (3) Apply ASTRA filter
- Astra (3) Apply Astra filter
- Astravan (3) Apply Astravan filter
- Aveo (2) Apply Aveo filter
- C4 (2) Apply C4 filter
- C5 (2) Apply C5 filter
- Captur (2) Apply Captur filter
- Clio (2) Apply Clio filter
- Croma (3) Apply Croma filter
- Cruze (2) Apply Cruze filter
- Cube (2) Apply Cube filter
- Duster (2) Apply Duster filter
- Grand Scenic (2) Apply Grand Scenic filter
- Idea (2) Apply Idea filter
- Jimny (2) Apply Jimny filter
- Juke (2) Apply Juke filter
- Kangoo (2) Apply Kangoo filter
- Laguna (2) Apply Laguna filter
- Leon (2) Apply Leon filter
- Logan MCV (2) Apply Logan MCV filter
- Megane (2) Apply Megane filter
- Micra (2) Apply Micra filter
- Note (2) Apply Note filter
- Octavia (2) Apply Octavia filter
- Orlando (2) Apply Orlando filter
- Sandero (2) Apply Sandero filter
- Scenic (2) Apply Scenic filter
- Signum (3) Apply Signum filter
- Stilo (3) Apply Stilo filter
- Superb (2) Apply Superb filter
- Swift (3) Apply Swift filter
- Synergie (2) Apply Synergie filter
- Toledo (2) Apply Toledo filter
- Trax (2) Apply Trax filter
- Twingo (2) Apply Twingo filter
- Ulysse (2) Apply Ulysse filter
- Vectra (3) Apply Vectra filter
- Xsara (2) Apply Xsara filter
- Zafira (3) Apply Zafira filter
Used Suzuki Tensioners
All used Suzuki Tensioners listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Suzuki from premium breaker yards from across the UK.
About Tensioners
The drive belt system is made up of the drive belt, drive belt tensioner, and drive belt pulleys. The Suzuki tensioner works to ensure the drive belt is kept secure while the car is in motion while functioning to apply the right amount of steady pressure to the drive belt.
The drive belt is a long piece of rubber which coils through a series of pulleys which contain bearings, usually operating with a spring mechanism. The pulleys function to enable the drive belt to spin around smoothly allowing the drive belt to propel or drive various components in the engine compartment, such as the alternator, air pump and power steering pump. It is vital that the correct tension is applied continuously to the drive belt while it is working. Incorrect pressure on the drive belt can cause extra stress to the components during their functioning, which can cause them to underperform and deteriorate.
Situated in the engine compartment, the drive belt tensioner assembly is a metal structure housed in a casing and bracket and primarily consists of a coil spring, which allows for the precise amount of pressure to be applied to the drive belt to keep it in place, and a pulley. The pulley mechanism allows the drive belt to run along the inside of the tensioner, which enables it to apply tension to the belt as it spins around its path of pulleys and generates the mechanism and power needed to drive the components it serves. While primarily functioning to apply a steady pressure to the drive belt, the Suzuki tensioner also helps to prolong the life of the parts driven by the drive belt, such as the air conditioning compressor and water pump, by taking some of the strain away from these parts which allows them to provide optimum performance as well as a longer working life.
If the Suzuki tensioner isn't applying enough pressure to the drive belt then the belt can become loose and deviate from its position. A sure sign of a loose drive belt is a nasty screeching noise. A slipped drive belt will lead to extremes of temperature as the belt struggles, eventually leading to a damaged drive belt. A slipped drive belt can also affect the proper performance of the components powered by the drive belt. Often the cause of a slipped drive belt is the spring inside the tensioner has become worn and is unable to apply the right amount of tension. If too much pressure is applied to the drive belt by the tensioner this can add undue stress to the parts driven by the drive belt which ultimately leads to premature wear and tear of these parts. To avoid having to replace expensive parts such as the alternator, ensure the tensioner is fitted correctly, functioning properly and changed regularly to ensure perfect performance. A useful general rule of thumb is to replace the tensioner when you replace the drive belt. It is advisable to change the entire drive belt system at the same time which can help to ensure the system lasts longer and works at its best. The tensioner can suffer from rust damage and should be replaced if worn by rust, cracked, chipped or dented. The Suzuki tensioner is the ideal replacement part when the tensioner has failed. Specifically designed and manufactured for the make and model of your vehicle, this part will be completely compatible.
Suzuki trivia
- A lengthy and controversial court case seriously affected Suzuki's reputation. An article in Consumer Reports in 1996 said that the Suzuki Samurai 4x4 was easily tipped over. Sales dropped after the review, and Suzuki sued the magazine. They hoped to get more than £60million, but after eight years, the case was settled out of court.
- Suzuki sold its first car, the 360cc Suzulight, in 1955. Before that, the company generally made looms, then bicycles.
- Suzuki sells more cars in India than in any other country. They started selling there in 1981 after realising the huge potential market. They now have around 47% of the market share, with their closest competitors being Hyundai who have just 17%.
- Known for their motorbikes as much as their cars, Suzuki is the builder of the world's fastest bike, the Hayabusa. It has been clocked at over 186mph.
- It takes Suzuki workers exactly 2,545 steps to completely finish making a car from scratch. Back in 2014, it used to take 3,077!