Buy New and Used Van and Car parts

Find best value great quality parts at cheap prices for your car, van and 4X4s HERE!

Not sure of reg or non-UK reg? Enter make and model here

Not sure of reg? Enter Make and Model manually

Find any Van or Car Part for free, Saving time and Money £££

Find parts now

1Enter your Registration

2Select what parts you want

3Buy parts now or get free personalised quotes

Check our right part guarantee and see how your money is secure when purchasing on Breakeryard.com

Used Land Rover Steering Racks

All used Land Rover Steering Racks listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Land Rover from premium breaker yards from across the UK.

About Steering Racks

One of the most popular steering systems in modern motor vehicles is the rack and pinion system. The Land Roversteering rack forms one part of the mechanics of this system. One of the reasons for the system’s popularity is undoubtedly its simplicity. In a typical non-powered steering system a set of rack and pinion gears is enclosed in a metal tube. Each end of the rack protrudes from the ends of the tube. Each end of the Land Roversteering rack is connected to a rod, known as a tie rod. The pinion is connected to the steering shaft and when the steering wheel is turned it causes the pinion gear to spin, which moves the Land Roversteering rack transversely. The tie rods on either side of the rack connect to spindles on the car wheels. The transverse movement of the rack thereby causes the wheels to turn right and left according to the direction in which the vehicle is being steered.

In a power steering system the design of the Land Roversteering rack has one or two variations. A section of the rack is connected to a cylinder with a piston in the centre, which has a fluid port on either side. Hydraulic fluid is provided to either side of the piston, which causes the Land Roversteering rack to move, producing the power assisted steering.

Land Rover trivia

  • Land Rover was the two-decade standout winner of the Camel Trophy, a gruelling off-road challenge that sees vehicles compete in Siberia, the Sahara, Australia, and other hostile terrains.
  • The designer Charles S. King worked with Rolls Royce to design jet engines before going on to build the Range Rover. King would go onto building a car around those jet engines that then held the world land speed record, the first turbine-powered vehicle to do so.
  • According to the film, Judge Dredd (1995), Land Rover will be the last ever car manufacturer in the world. The car company had a heavy presence in the film, and you can still see some film versions of the car driving around the UK.
  • The Range Rover designer hated what he had made. Charles Spencer "Spen" King CBE, was focused solely on designing a large V8 engine, and then just drew a box around it to show where the engine would sit. It annoyed him for the rest of his life, and he insisted that he'd only put 0.1% of development time on the car shape. He also hated that they would be used for anything other than farming, saying, "...to use them in the school run, or even in towns and cities at all, is completely stupid."
  • Land Rovers and James Bond go hand in hand. The 4x4 Land Rover has been in more Bond films than there have been Bond actors! In Spectre, the Defender SVX was customised with 37-inch tyres and more power.