Used Honda Carb Mountingss

All used Honda Carb Mountingss listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Honda from premium breaker yards from across the UK.

About Carb Mountingss

The Carburettor is mounted on Honda carb mountings which are designed to act as a sealant, holding the carb firmly in position and perfectly aligned. The carb mountings are usually a flange/plate used with circular rubber seals to create a soft, secure fix between the carb and the mount.

The Honda carb mountings function to strengthen the holding of the carb to the intake manifold and to keep it in the right position, as well as absorbing vibrations and noise from the engine.

The carb has the important job of ensuring the right amount of air and fuel mix is provided to the cylinders in the engine in order for combustion to take place and for the engine to perform at its best. The Carburettor is essentially a pipe through which the air needed for combustion travels. The carb narrows in the middle which causes the pressure in the air, as it flows through the carb, to drop at this point, creating a vacuum which sucks the fuel in. It works by using valves, referred to as the choke and throttle, which take in the right amount of air and fuel which is mixed in the carb before it is sent to the engine.

Carb mountings will wear over time and can become brittle and cracked. Warped carb mountings can lead to a vacuum leak. Replacing this part when it has failed with Honda carb mountings will ensure perfect compatibility, specifically designed for the make and model of your vehicle.

Honda trivia

• One of their most important contributions to the history of car manufacturing is the development of the first VTEC engines.
• An accessory that didn’t quite land, the early models of the Honda CR-V came with an in-built picnic table that could be pulled out.
• The first foreign vehicle that was ever manufactured in Ohio, America, was the 1982 Honda Accord.
• Honda’s main plant in Japan is so big that it has its own airport.
• With 5% of their revenue funnelled straight back into research and development, Honda has been responsible for groundbreaking new technologies that have seen widespread adoption across the car industry. The most famous is the notion of a practical four-wheel-drive vehicle, first seen in the Honda Accord in 1987.