Find parts for your car
Models
- B-Max (1) Apply B-Max filter
- C-Max (6) Apply C-Max filter
- Ecosport (1) Apply Ecosport filter
- Edge (3) Apply Edge filter
- Fiesta (25) Apply Fiesta filter
- Focus (31) Apply Focus filter
- Focus C-Max (4) Apply Focus C-Max filter
- Fusion (1) Apply Fusion filter
- Galaxy (1) Apply Galaxy filter
- Ka (1) Apply Ka filter
- KA+ (1) Apply KA+ filter
- Kuga (4) Apply Kuga filter
- Mondeo (11) Apply Mondeo filter
- MONDEO ZETEC (1) Apply MONDEO ZETEC filter
- Puma (1) Apply Puma filter
- Tourneo Courier (3) Apply Tourneo Courier filter
- TRANSIT (2) Apply TRANSIT filter
- Transit (2) Apply Transit filter
- TRANSIT 350 (2) Apply TRANSIT 350 filter
- TRANSIT 350 LWB (1) Apply TRANSIT 350 LWB filter
- Transit Connect (6) Apply Transit Connect filter
- Transit Courier (3) Apply Transit Courier filter
- V40 (3) Apply V40 filter
Used Ford Brake Pedals
All used Ford Brake Pedals listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Ford from premium breaker yards from across the UK.
About Brake Pedals
The Ford brake pedal is a metal pedal located inside the vehicle on the driverside and is depressed by the driver’s foot to apply the brakes and stop the vehicle. The Ford brake pedal is attached to a rod which in turn is attached to the brake master cylinder. This cylinder creates the necessary pressure in the brakes to activate them. When the driver depresses the brake pedal it causes a brake pad to rub on the brake disk and create friction, slowing down the vehicle.
The Ford brake pedal is quite sturdy and isn’t prone to failure, however the top plate of the pedal which is depressed by the driver can become worn and make it difficult to brake without the foot slipping. The Ford brake pedal can also give you a good indication of any other brake issues in your vehicle. For example, if your brake pedal goes straight down to the floor or is loose it could indicate either a failed master cylinder or damage to the push rod. This metal rod is attached to the brake pedal and allows the pedal to be depressed. Damage to these components can cause brake failure.