Used SEAT Steering Knuckles

All used SEAT Steering Knuckles listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for SEAT from premium breaker yards from across the UK.

About Steering Knuckles

A motor vehicle’s SEATsteering knuckle is a component which contains the wheel hub or spindle and attaches to the suspension mechanism through a ball joint. It plays an integral role as the pivotal point of the suspension and steering system. On cars with a conventional suspension system, the spindle of the SEATsteering knuckle locates and provides support to the inner and outer wheel bearings. There are various types of SEATsteering knuckle, which come in a range of different shapes and sizes. However, the two main designs can be divided into those that are accompanied by a hub and those that come with a spindle.

The SEATsteering knuckle plays an important part in the steering and suspension system of a modern motor vehicle. If it becomes worn or is damaged there is likely to be immediate, discernible evidence. This normally takes the form of damage to the front tyres, which is exhibited by uneven wear.

Defective steering geometry caused by a damaged SEATsteering knuckle assembly adversely impacts on the steering and suspension of the car and may have safety implications. The system should be inspected immediately and the damaged part replaced. Failure to do so may result in additional damage to the vehicle’s suspension and steering systems.

SEAT trivia

• SEAT exports as much as a whopping 80% of its cars every year.
• 2019 was the best year of sales for SEAT when it sold an impressive 574,100 cars.
• The SEAT Ibiza was designed by the same man who designed the Mark 1 VW Golf, the Lotus Esprit, and the DeLorean DMC-12. Giorgetto Giugiaro is well worth a Google.
• The first production car for SEAT was the 1400 Saloon. It was a success even before it started rolling out, with 10,000 pre-orders. At the time, it cost over 121,000 pesetas, which is around £35k today. The facilities that SEAT had back then could only make five cars a day.
• SEAT is a Spanish brand, and between 1953 and 1965, they would only make cars for the Spanish market. Their first tentative step to global sales was centred around Columbia, but they now sell to 77 countries around the world.