Find parts for your car
Makes
- (-) Remove Ford filter Ford
- (-) Remove Saab filter Saab
- (-) Remove Vauxhall filter Vauxhall
- Audi (20) Apply Audi filter
- BMW (20) Apply BMW filter
- Citroen (34) Apply Citroen filter
- Fiat (26) Apply Fiat filter
- Jaguar (17) Apply Jaguar filter
- Kia (18) Apply Kia filter
- Land Rover (27) Apply Land Rover filter
- MERCEDES (23) Apply MERCEDES filter
- MG (26) Apply MG filter
- MINI (30) Apply MINI filter
- Nissan (21) Apply Nissan filter
- Peugeot (62) Apply Peugeot filter
- Renault (20) Apply Renault filter
- Rover (28) Apply Rover filter
- Toyota (17) Apply Toyota filter
- Volkswagen (26) Apply Volkswagen filter
- Volvo (131) Apply Volvo filter
The Hydragas suspension pump is an invaluable tool for anyone who uses a Hydragas suspension system in their vehicle. The Hydragas suspension system is used in classic cars and vintage vehicles and works by having a Hydragas unit at each wheel which are joined front and rear with piping. The Hydragas unit consists of a sphere which contains Hydrolastic fluid in the bottom section and nitrogen gas in the upper section of the sphere and the two are separated by a damper valve to keep them apart. This nitrogen gas creates pressure on the Hydrolastic fluid and is compressed during the movement of the vehicle, much like a spring on a conventional suspension.
The portable Hydragas suspension pump can be used for roadside repairs of Hydragas and Hydrolastic suspensions in the event that your vehicle loses suspension height by pumping in the relevant amount of Hydrolastic fluid.
The robust Hydragas suspension pump can also be used to remove air in the suspension system to ensure the correct trim height for the vehicle. The trim height of a vehicle should be checked every six months or 6000 miles to ensure it’s at the right height.