Find parts for your car
Makes
- (-) Remove Peugeot filter Peugeot
- (-) Remove Volvo filter Volvo
- Alfa Romeo (1) Apply Alfa Romeo filter
- Audi (1) Apply Audi filter
- Citroen (6) Apply Citroen filter
- Fiat (1) Apply Fiat filter
- Ford (2) Apply Ford filter
- Honda (1) Apply Honda filter
- Hyundai (1) Apply Hyundai filter
- Jaguar (1) Apply Jaguar filter
- Kia (1) Apply Kia filter
- Lancia (1) Apply Lancia filter
- Mazda (2) Apply Mazda filter
- Mercedes-Benz (1) Apply Mercedes-Benz filter
- Nissan (1) Apply Nissan filter
- Opel (1) Apply Opel filter
- Renault (1) Apply Renault filter
- Skoda (1) Apply Skoda filter
- Subaru (1) Apply Subaru filter
- Suzuki (1) Apply Suzuki filter
- Toyota (2) Apply Toyota filter
Parts
- (-) Remove Brake Master Cylinder filter Brake Master Cylinder
- Brake Caliper (41) Apply Brake Caliper filter
- Brake Servo (5) Apply Brake Servo filter
- Brake Servo Unit (4) Apply Brake Servo Unit filter
- Caliper (47) Apply Caliper filter
- CV Gaiter Outer (1) Apply CV Gaiter Outer filter
- Hand Brake (1) Apply Hand Brake filter
- Hand Brake - Electric & Control Unit (1) Apply Hand Brake - Electric & Control Unit filter
- Handbrake Cable (1) Apply Handbrake Cable filter
- Handbrake Cover (1) Apply Handbrake Cover filter
- Handbrake Lever (8) Apply Handbrake Lever filter
- Master Cylinder (1) Apply Master Cylinder filter
- Servo Unit (4) Apply Servo Unit filter
Used Peugeot Partner Braking System
All used Peugeot Partner Braking System listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices or used OEM car parts up to 80% cheaper than main dealer prices for Peugeot Partner from premium breaker yards from across the UK.
About Braking System
What is the braking system/what does it do?
The braking system varies on different makes and models. It may consist of a drum brake type system on all four wheels, rear drum brakes with disc brakes on the front wheels or disc brakes on all four wheels. Sometimes on the latter the hand brake system is of a drum type incorporated in the rear wheel discs. All of these systems operate using hydraulics. When the brake pedal is pressed it depresses a piston in the master cylinder forcing fluid along the brake piping to a slave cylinder at each wheel which bring into operation the brake shoes or disc pads.
Getting into the details of the braking system
These various systems entail various combinations of hydraulic fluid, brake pipes, master cylinders, slave cylinders, servos, brake pipes, brake drums, brake shoes, brake discs, brake pads, brake calipers, heat shields and various electronic warning and control devices to prevent wheel locking under heavy braking. The hydraulic system may be aided by a brake air servo, this is a device which uses the vacuum from the inlet manifold to operate a diaphragm which when activated by brake operation triggers the influx of outside air to one side of the vacuum and moves the diaphragm which assists the movement of the slave cylinder.
Drum brakes consist of a hollow drum to which the wheel is fixed.The drum and wheel revolve around a stationary backplate to which are fixed two curved metal shoes which have brake linings made of a heat proof material. The shoes have a pivotal mounting at one end and hydraulic pistons at the other, when the brakes are applied the shoes are forced outwards by the slave cylinders and lining of the shoes are pressed against the smooth inside of the drum, consequently slowing the spinning of the wheels.
Disc brakes, instead of the drum, have a disc to which the wheel is fixed, the disc is straddled by the brake caliper which holds the slave cylinder and the brake pads either side of the disc. The pads are metal pieces with a friction pad of heat proof material attached, the pads cover a broad section of the disc. When the brakes are applied the pads are forced hydraulically against the disc consequently slowing the spinning of the wheels. The pistons in the slave cylinder move only a fraction as the pads are positioned to just clear the disc, when the brake is released the pads move back to just clear the discs.
Additionally all vehicles are fitted with a handbrake, this is a cable operated system which can be used in an emergency but is primarily used as a parking brake. This is operated from the hand lever next to the driving position and is a lever pulling two cables which operate the rear wheel brake pads or brake shoes mechanically as opposed to hydraulically.
What if something goes wrong with the braking system?
Indications of faults in the braking system are, in modern cars signaled through warning lights and messages. A lowered performance in braking, noises when applying the brakes and any handling problems arising during braking are signs that the braking system needs checking.
The commonest serviceable parts of the braking system are the brake pads and brake shoes as these wear due to their usage which involves high heat and friction, also wearing at a slower rate are the drums and discs. Care must be taken to ensure that the reservoir of hydraulic fluid is kept at the necessary level, as if the level is allowed to drop to low air will be sucked into the system resulting in brake failure. Any significant loss of fluid is a sign of failure in some part of the system.
Due to the high energy forces, heat, friction and stresses involved with the braking system in the area of the discs and wheels it is of the utmost importance that all components are in good order.
Peugeot trivia
- It was also in 1913 (some might say because of the Indy 500 win) that Peugeot were responsible for the production of half of all of the cars in France. That quickly made them one of the world's biggest names in the automotive industry.
- It's a dubious claim to fame, but the first recorded stolen car was a Peugeot! The car, belonging to Baron de Zuylen, was nicked by his mechanic in 1896, but the thief was caught, and the car returned to its rightful owner.
- It was Armand Peugeot who turned the company into car manufacturing. He called the company the Société des Automobiles Peugeot (Peugeot Automotive Society) and was the one who approved the famous lion emblem that is still used today.
- It's hard to believe, but the Peugeot company was founded in 1810! Of course, it didn't make cars then. Instead, it built pepper mills, salt mills and, eventually bicycles. It wasn't until 1889 that the first Peugeot car was made (they only made four of them, and they were powered by steam).
- You know the name Ettore Bugatti and the brand that bears his name, but did you know that Bugatti also designed the four-cylinder engine in 1912 for the Peugeot Bébé? You can't miss that unmistakable Bugatti look once you know that fact, and the car quickly became France's best selling car.