Find parts for your car
Used Ford Puma Clutch Release Bearing
All used Ford Puma Clutch Release Bearing listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices or used OEM car parts up to 80% cheaper than main dealer prices for Ford Puma from premium breaker yards from across the UK.
About Clutch Release Bearing
A Puma Ford clutch release bearing is located between the clutch fork and the pressure plate and is essential in the clutch operation. When a driver presses on the clutch this creates pressure, which is turned into hydraulic pressure in the clutch master cylinder and is transferred to the rod. This pressure is then exerted on to the Puma Ford clutch release bearing which lastly pushes on the pressure plate and disconnects the engine when you bring it to a stop. This enables you to change gears.
One major cause of damage to a Puma Ford clutch release bearing is waiting in traffic with the clutch disengaged but vehicle in gear. The excessive load causes stress to the Puma Ford clutch release bearing. Issues with the Puma Ford clutch release bearing are serious and should be rectified immediately. The most noticeable symptom is a grinding or whirring noise when applying the clutch, which goes away when you release the clutch pedal. This indicates that the Puma Ford clutch release bearing is wearing out and may seize. If the bearing fails it will cause wear to the pressure plate and the attached clutch disk. A complete clutch replacement may be required.